What are infiltration trenches used for?

What are infiltration trenches used for?

§ 1441 et seq.). Infiltration trenches manage runoff from paved areas, rooftops, and other impervi- ous surfaces. Their function is to provide ground water recharge and prevent stormwater discharge from entering the lake. Crushed stone can be purchased at your local gravel pit.

What is an infiltration ditch?

Infiltration trenches are linear ditches that collect rain water from adjacent surfaces, and their highly permeable soils allow the water to quickly seep into the ground.

How much does an infiltration trench cost?

Cost Issues The construction cost of infiltration trenches can vary greatly depending on the configuration, location, site-specific conditions, etc. Typical construction costs in 2003 dollars range from $4 – $9 per cubic foot of storage provided (SWRPC, 1991; Brown and Schueler, 1997).

How do you clean an infiltration trench?

Standing water in and around the infiltration trench more than 72 hours after the storm The trench may be clogged. Remove leaves, grass clippings, sediment, or other visible debris. Clean or replace gravel. Check pretreatment areas for erosion and reseed if needed.

What are infiltration systems?

In simple terms, anything that allows water to pass through to the soil below is, essentially, a filtration system.

What is a trench for water called?

A ditch is a small to moderate divot created to channel water.

Are infiltration trenches expensive?

Infiltration trenches are somewhat expensive, when compared to other stormwater practices, in terms of cost per area treated. In addition, infiltration trenches can fit into thin, linear areas. Thus, they can generally fit into relatively unusable portions of a site.

How do you size an infiltration basin?

The depth of water that can be drawn down in 48 hours can be calculated using the following equation: d48 = KDESIGN × 4 Where: d48 = basin 48-hour drawdown depth, ft KDESIGN = basin design infiltration rate, in/hr (See Appendix VII) This is the maximum depth of the basin below the overflow device to achieve drawdown in …

What are the different types of infiltration systems?

Types of Infiltration trench Redirect page Types of Infiltration trench

  • Infiltration basin.
  • Infiltration trench (a.k.a. infiltration gallery)
  • Dry wells (a.k.a. infiltration tubes, french drains, soak-away pits or soak holes)
  • Underground infiltration systems.
  • Related pages.

About the Author

You may also like these