How long does it take for 511 sealer to dry?
1 – 3 hours
Cure Time: Will be dry to the touch in 1 – 3 hours and may be used for normal foot traffic. For optimum results the area should be kept dry and free from staining materials for 72 hours.
How do you apply 511 impregnator sealer to backsplash?
How to Seal Your Kitchen Backsplash
- Step 1 – Clean the Tile.
- Step 2 – Apply the Sealer. The sealing product I used was Miracle 511 Impregnator Sealer. I had a quart sized container and only used a ¼ of the bottle to seal the backsplash across the whole kitchen.
- Step 3 – Wipe Off Excess Sealer and Let Cure.
Is 511 a good sealer?
INDEPENDENT LABORATORY TESTS SHOW 511 IMPREGNATOR OUTPERFORMS COMPETITIVE PRODUCTS. (Test results are available upon request). These claims were exactly what we were looking for out of a penetrating, impregnating sealer so we decided to try it out for ourselves.
When can I apply second coat of 511 impregnator sealer?
Do not allow 511 products to dry or evaporate on the surface or a residue will appear. This residue can be removed by reactivating it with more 511 or mineral spirits and buffing immediately dry. For multiple applications allow to dry 1 – 3 hours minimum before applying second application.
Does 511 impregnator sealer darken grout?
511 is an oil based material and can shade some materials slightly darker. Any lightening you may see after using the 511 on grout would be associated with efflorescence (salts coming up through the grout). Non-yellowing 511 Impregnator Sealer can be applied before or after grouting tile.
What is 511 impregnator sealer used for?
511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look.
Should I use impregnator or sealer?
Impregnator will keep the acid out of the stone but not off the top surface. Sealers on the other hand will provide protection on the surface and resist better stains but they do change the appearance (create shine and darker tone of color) and they will require frequent stripping and reapplication.
Does 511 Impregnator need 2 coats?
Answer: Yes you can, we used for our grout, you need to apply a coat, wait 2-3 hrs and apply at least one more coat.
Does 511 impregnator need 2 coats?
How to apply 511 sealer to natural stone?
Apply 511 Impregnator using a Mira Brush or a clean towel. Apply enough to wet the surface. Be careful not to saturate the open grout joints. Allow 511 Impregnator to stand for approximately 3 – 5 minutes for maximum penetration. All excess must be removed at this time by buffing surface with a clean dry towel.
How do you use the 511 impregnator sealer?
Apply 511 Impregnator to all grout with a paint brush. Any excess sealer that gets on the surface should be wiped off with a clean towel before it dries. On larger jobs grout can be sealed by retreating the entire area including the tile or stone surface a second time.
What kind of sealer is 32 oz.511?
Miracle Sealants 32 oz. 511 Impregnator Penetrating Sealer is designed to seal and protect medium to dense porous surfaces, including natural stone, tile, slate, ceramic, quartz and grout.
What kind of sealer is Miracle sealants 511?
Review of Miracle’s 511 Impregnator Sealer. 511 Impregnator Sealer has been a favorite sealer for many tile installers. It is a relatively high VOC solvent based sealer that can be used on all types of tile, grout and stone surfaces. It has a unique formula that seems unlike any of the sealers we tested.