Which type of regulator is IC 723?
The 723 voltage regulator is commonly used for series voltage regulator applications. It can be used as both positive and negative voltage regulator. It has an ability to provide up to 150 mA of current to the load, but this can be increased more than 10A by using power transistors.
How many pins are there in IC 723?
It consists of a voltage reference source (Pin 6), an error amplifier with its inverting input on pin 4 and non-inverting input on pin 5, a series pass transistor (pins 10 and 11), and a current limiting transistor on pins 2 and 3.
What is the IC 723?
Explanation: The IC 723 is a voltage regulator, which can act as both a low voltage regulator as well as a high voltage regulator. Output can be set between 7-37 volts. 7 volts is the reference starting voltage.
Which connection is used in IC 723 to boost the current?
Due to this reason output terminal pin10 of the IC 723 is upgraded with an external emitter follower transistor Tr1. This allows the IC output to get upgraded to much higher current depending on the rating of the transistor.
What are the advantages of IC voltage regulator?
What are Advantages of IC voltage regulators?
- The ic voltage regulator is conveniently used for local regulation.
- The ic voltage regulator is easy to use.
- It is most efficient and reliable.
- The ic voltage regulator is versatile.
- It is very cheap due to mass production and easily available.
Which is the most commonly used low voltage switching regulators?
12. Which is the most commonly used low voltage switching regulators? Explanation: The silicon steel EI butt stack exhibits high permeability high flux density and ease of construction and mounting therefore, it is most commonly used in low voltage switching regulators.
How is the IC 723 voltage regulator used?
Draw the functional block diagram of IC 723 voltage regulator and explain its working as a basic low voltage regulator. Design the same for an output of 5v and load current upto 200 mA. The LM723 is the adjustable voltage regulator IC designed for series regulator application, with a current output of 150mA without external pass transistor.
Is the LM723 an adjustable voltage regulator?
The LM723 is the adjustable voltage regulator IC designed for series regulator application, with a current output of 150mA without external pass transistor. The above figure shows the Functional Diagram of IC 723.
What kind of 723 volt power supply do I Need?
All units use th e 723 voltage regulator. Left-13.8 vo lt power supplies. Center -On top of the 28 A 13.8 volt power supp ly are two quick/trickle ch argers. Right-Onthe bottom is a bench power supply. Above, battery charger (black meter) and to its right a 1.6 A 13.8 volt power supply.
Which is 723 regulator circuit with pass transistor?
RJ Basic 723 regulator circuit with pass transistor is adjusta ble from about 8 volts to 30 volts w ith appropriate Vin’ The 2N3055 in a TO-3case is a good choice for the pass transistor. It is an inexpensive power transistor rated at 15-A and 115-watts dissipation. I never push the 15-A rating but would rather use several pass tran-
