What oil should I use in my BMW 320i?
Motor oil Helix Ultra ECT 5W-30 fully complies with the specification for the 320i, -Touring (N46, E90/E91) (3 Series) (P) (2005-) and is the ideal lubricant for this car BMW.
What oil does a petrol BMW take?
Mobil 1™ ESP LV 0W-30 is a fully synthetic low ash oil that has been approved by BMW Longlife-12 FE oils for use in petrol and diesel engines in Europe.
How much oil does BMW 320i take?
Engine Oil
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.1 quarts (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) Replace drain plug seal. |
What kind of oil does a BMW engine use?
Each new spec is coded by year and roughly corresponds to new generations of BMW engines (ex. LL-01). These ratings are just a guide so that the appropriate oil is used for your engine design. And like our API approach we recommend using a BMW oil spec that matches your BMW engine model and type.
Can you use API oil on a BMW 335i?
The BimmerWorld View: If you’re going to use an older API oil on a newer car (SL on a E92 335i or F82 M4, for examples) you must be aware of the differences. The higher ZDDP and SAPS will shorten the life of a factory ceramic catalytic converter. It could also clog the catalytic converter leading to a major loss of power or engine damage.
What kind of oil to use in an E90?
We recommend an SL oil for pretty much all cars built before the E90 generation: E85, E83, E63, E60, E53, E46, E39, E38, Z3, E36, E34, and E32. It can be used in E30 and older models too but only in thicker viscosity. These cars can use an SN oil but SL is much more appropriate.
How often do BMWs change their engine oil?
Just like API ratings, BMW revises their oil formulations every few years based on contemporary engine design, mileage and emissions requirements, fuel type and quality, region, service plans, and marketing. Each new spec is coded by year and roughly corresponds to new generations of BMW engines (ex. LL-01).
