Why is my cello string loose?

Why is my cello string loose?

When this wood dries out, the pegs become skinnier. The cells of the wood of the peg box will shrink too. So the peg hole gets bigger, the peg gets smaller, and the whole system loses the friction that it needs to stick in place and hold the string in tune. So it comes loose and the string unravels.

How much does it cost to replace a cello string?

Cello

Restring, including tuning $5 per string (strings not included)
Replace and fit bridge $65/$100 deluxe fit and carve (bridge not included)
Re-hair bow (horsehair) $65/$45 for Glasser (to be paid in advance)
Re-glue fingerboard $60** and up
Install fine tuners (without restringing) $5 per tuner (tuner not included)

Why does my cello not stay in tune?

When a peg slips or sticks, tuning (and staying in tune) can be difficult. If your pegs keep slipping or sticking, remove the peg and apply a specialized compound to the shiny parts of the removed peg. If your peg no longer fits in the peg box, bring your cello to a luthier to find out if the peg needs replacing.

Can a cello be fixed?

When your cello has a crack, it might be because you bumped it against something, or dropped it. If this happens, you need to take your cello to a luthier to have it fixed because a crack can eventually make your instrument collapse. If it’s a chip in the wood, you can take the piece to a luthier and have them fix it.

How often should you change cello strings?

I recommend that beginner and intermediate students replace strings every 10-12 months or before the strings show signs of physical decay. Advanced student cellists who are practicing daily should consider replacing their strings every 8-12 months depending on how many hours they practice and perform.

How do you fix a cello string?

Process to Replace Cello Strings

  1. Loosen the Pegs.
  2. Remove the String from the Peg.
  3. Remove String from the Fine Tuner.
  4. Connect the New String to the Fine Tuner.
  5. Insert the End of the String into the Peg.
  6. Wind the String onto the Peg.
  7. Tighten the String.
  8. Align the String to the Bridge and Nut.

How do you fix a loose string?

Make sure that as you turn the peg that the string evenly coils around the peg. If it crisscrosses itself, you’ll end up having to re-tighten it repeatedly. Use a peg lubricant (sometimes called “paste” or “compound”) to ensure that the peg turns freely, but still maintains the right amount of friction.

How do you change the strings on a cello?

Loosen the pegs by turning them to reduce the tension on the strings. This allows the strings to be removed. There are four pegs on a cello, two for the higher strings and two for the lower strings. In this tutorial, I am replacing a lower string.

How many strings are there on a cello?

There are four pegs on a cello, two for the higher strings and two for the lower strings. In this tutorial, I am replacing a lower string. In the picture, the lower strings are on the left and the higher strings are on the right. The lower strings are also thicker than the higher strings.

What to do if the pegs on your cello get stuck?

So depending on the day, you might find the pegs really stuck or really loose. This is a problem that you can fix at home. You can find online peg components that help move the pegs in case they get stuck. If the peg is too loose, you can push it in as you move it to the sides.

What to do if your cello has a hole in it?

You can find online peg components that help move the pegs in case they get stuck. If the peg is too loose, you can push it in as you move it to the sides. If the peg is too loose or too large for the hole it goes in, you might need to get it changed.

About the Author

You may also like these