How long do Zoeller ejector pumps last?

How long do Zoeller ejector pumps last?

Unsurprisingly, we’d expect the M53 to last between 7 and 15 years while we’d expect the CDU980E to last between 4 and 8 years; this is significant if you’re hoping to avoid replacing your sump pump for a good amount of time.

How do you reset a Zoeller sump pump?

  1. Step 1 – Disconnect the Power. Want to avoid a shocking experience – then make sure to disconnect the power before you start.
  2. Step 2 – Remove the Pump. Next, remove the basin cover and take your pump out of the basin.
  3. Step 3 – Clean Dirt & Debris.
  4. Step 4 – Check Drain Lines.
  5. Step 5 – Reconnect Everything.

What is the warranty on a Zoeller M53 sump pump?

3 years
SUMP PUMP-M53-AUTO-CAST IRON -1/3 HP – 53-0001- Warranty= 3 years from MANUFACTURED DATE or from Proof of Purchase date.

How long is warranty on Zoeller sump pump?

For submersible pumps, depending on the specific model, warranty could be either two years from the date of purchase (builder series), three years from the date of purchase (professional series), or five years from the date of purchase (premium series). Proof of purchase is required.

What is the warranty on Zoeller pumps?

36 months from date of manufacture (on most Zoeller pumps). Abuse or misapplication can void this warranty. We have authorized warranty and service repair stations located throughout the United States.

What is the warranty on the Zoeller Model M63 and m95 Premium sump pumps?

The Zoeller M63 Sump Pump DESCRIPTION: The Zoeller M63 Mighty Mate Premium is known for its quality cast iron construction and 5 year warranty.

What is the horsepower of the Zoeller m803 residential grinder pump?

1/2 HP

Brand Zoeller
Application Residential sewage
Horsepower 1/2 HP
Voltage 115 Volts
Operation Automatic

What sump pump has the best warranty?

Zoeller brand sump pumps
Zoeller brand sump pumps are the finest pumps available. They have a one year manufacturer’s warranty. If they fail, the manufacturer will repair or replace the pumps at no charge.

Is Zoeller a good pump?

This pump is high quality and pumps a large volume fast. There is one BIG problem with it though, the built in float switch. The issue is that the range on the float is both not adjustable and far too short for your average sump pit.

Are Zoeller sump pumps made in the USA?

Although it has expanded over the years, the company still manufactures products at its original location in Louisville, KY. Even today, over 95% of Zoeller Pump Company’s branded products are made in the USA using a majority of US content.

What are the different models of the N53?

WIRING DIAGRAM FOR MODELS “M53-A” and “D53-A” 9/81 (VM) thru 8/86 (US) “M53-B”, “M53-C” and “M53-D” “D53-B”, “D53-C”, and “D53-D” 9/86 (VS) thru Current WIRING DIAGRAM FOR MODELS “N53-A”, “N53-B” and “N53-C” “E53-A”, “E53-B”, and “E53-C” 9/81 (VM) thru Current TO ORDER REPLACEMENT PARTS: PLEASE FURNISH THE FOLLOWING INFORMATION:

What kind of pump case does Zoeller have?

Model 53 ®: cast iron switch case, motor and pump housing, and a glass-filled plastic impeller. Model 57: cast iron construction with a cast iron impeller. Model 55: bronze switch case, motor and pump housing, and a glass-filled plastic impeller. Model 59: bronze construction with a bronze impeller.

What kind of backup system does Zoeller have?

Zoeller Pump Company’s new Aquanot ® Fit 508 battery backup system is a Professional Series backup that offers an economical option for homeowners in need of dependable protection from basement flooding. Zoeller wants to hear from you! If you have a Zoeller product story you would like to share, please send it to [email protected]

Where is the Zoeller water pump company located?

With a reputation for producing high performing, quality products, Zoeller has a rich heritage based on ‘Made in USA’ Manufacturing. Although it has expanded over the years, the company still manufactures products at its original location in Louisville, KY.

Are Zoeller sump pumps the best?

Zoeller is one of the most popular sump pump manufacturers on the market. Their line of pumps are some of the best and most dependable for household use, but choosing the right model can be confusing with so many similar pumps.

What is the difference between effluent and sump pumps?

When compared to a sump pump, a septic effluent pump has a greater level of durability. It is built with the ability to remove water at a more demanding pace than a sump pump. Some contractors may choose to swap a sump pump for a septic effluent pump in a pinch, but they compromise durability by doing so.

Is the Zoeller M267 a cast iron pump?

Zoeller builds high-quality pumps and this pump is true to form. The M267 is a heavy-duty pump from top to bottom. Cast iron construction for the vital parts, such as motor housing, base, and volume are essential if you want a pump to last for a long time.

What kind of sewage pump is Zoeller N267?

The N267 is a split phase pump that is not affected by materials normally found in drainage or sewage pumps The N267 pump has an 2-in FPT and 3-in NPT male discharge and is capable of passing 2-in spherical solids

What kind of motor does Zoeller pump use?

Combine that with stainless steel fasteners and components, and it’s clear that Zoeller knows how to build pumps. The non-clogging vortex impeller allows this pump to pass solids with ease. With an oil-filled, thermally protected motor, this pump can handle almost anything.

What makes Zoeller cast iron sewage pump so good?

The non-clogging vortex impeller allows this pump to pass solids with ease. With an oil-filled, thermally protected motor, this pump can handle almost anything. Zoeller gives this pump a powder coated epoxy finish that prevents corrosion.

About the Author

You may also like these