How do I deep clean my Canon Pixma printer head?

How do I deep clean my Canon Pixma printer head?


  1. Ensure that the printer is on.
  2. Open the printer properties dialog box.
  3. Start Print Head Deep Cleaning. (1) Click the Maintenance tab. (2) Click Deep Cleaning. (3) Select the ink group to be deeply cleaned.
  4. Print the nozzle check pattern to check the Print Head condition. See “Printing the Nozzle Check Pattern”.

Can you manually clean Canon printer heads?

Sometimes the built-in cleaning function isn’t enough. With most Canon printers, you can take the cleaning process a step further by manually cleaning the printhead.

How do you flush a Canon printer?

Ink Flush

  1. Open Canon IJ Printer Assistant Tool.
  2. Click Ink Flush. When the Ink Flush dialog box opens, select the ink group for which ink flush is to be performed.
  3. Execute ink flush. Make sure that the printer is on and then click Execute.
  4. Complete ink flush.
  5. Check the results.

What solution can I use to clean print heads?

First, you need to make a solution of 50% water and 50% isopropyl alcohol; this will create a solvent that will break down those pesky dried ink chunks. Place your cartridge on a paper plate with the printhead facing down. Apply the solution to the paper plate until your printhead is completely submerged.

Is it possible to clean a Canon printer head?

Usually Canon printer heads are easy to remove and clean. Just soaking it may not always do the trick. Also, make sure you have ink in the cartrudges. This fix does not apply to printers with 2 ink cartridge system (Tri-Color and Black).

What’s the best way to flush a Canon printer?

Raise the carriage assembly lever to unlock the printhead. Lift printhead straight up to remove. 3. Over a sink, run warm tap water directly into the 5 or 6 ink ports for approximately 2 minutes — this will effectively saturate the foam ports and blow ink out & thru the printhead nozzle plate bottom.

How big is a canon Pixma ip4300 printer file?

Software Included File Name Date File Size Easy-PhotoPrint EX Ver.4.7.0 (Windows) 01/12/18 57.57 MB My Printer Ver.3.3.0 (Windows) 12/27/16 5.55 MB Windows Adobe RGB 1998 Installer Program 10/01/13 329.34 KB Setup Utility Ver. 2.3.1 (Windows 7/7 .. 03/12/10 1.85 MB

How do you remove a printhead from a printer?

Pull the printhead up and out to remove it from the machine. Dampen the lint-free cloth with hot water and gently wipe away an excess ink on the printhead nozzle. Place the printhead in the container with the submerged paper towels. The nozzle should be facing down. Be careful not to touch the nozzle as it can be damaged easily.

About the Author

You may also like these