What is amplitude modulation and demodulation?

What is amplitude modulation and demodulation?

AN62582 explains how to implement amplitude modulation (AM) and demodulation using PSoC® 3 and PSoC 5LP. AM is achieved by multiplying carrier and message signals. Demodulation is achieved by sampling the AM signal at carrier frequency.

Where is amplitude modulation commonly used today?

Amplitude modulation is mostly used in the form of electronic communication. Currently, this technique is used in many areas of communication such as in portable two-way radios; citizens band radio, VHF aircraft radio and in modems for computers.

What is modulation and demodulation?

Modulation and demodulation Modulation is the process of encoding information in a transmitted signal, while demodulation is the process of extracting information from the transmitted signal.

What is basic principle of generating AM signal?

The modulating signal waveform has been superimposed on the carrier wave. When a sinusoidal carrier wave of frequency fc Hz is amplitude – modulated by a sinusoidal modulating signal of frequency fm Hz , then the modulated carrier wave contains three frequencies .

What is difference between modulation and demodulation?

The key difference between modulation and demodulation is that modulation is done at the transmitter side while demodulation is done at the receiver side of a communication system. Modulation is basically done to transmit data to longer distance whereas demodulation is done to regain the original message signal.

What is the principle of AM demodulation?

An AM signal encodes the information into the carrier wave by varying its amplitude in direct sympathy with the analogue signal to be sent. There are two methods used to demodulate AM signals: The envelope detector is a very simple method of demodulation that does not require a coherent demodulator.

What is the process of modulation and demodulation?

Question 1. What Is Modulation And Demodulation ? Modulation is the process of altering the characteristics of the amplitude, frequency, or phase angle of the high-frequency signal in accordance with the instantaneous value of the modulating wave.

How to interview for an amplitude modulation job?

Visit our Amplitude modulation job interview questions and answers page for frequently asked questions in the AM job interview. If playback doesn’t begin shortly, try restarting your device.

When does overmodulation occur in an AM wave?

Overmodulation (amplitude) occurs when signal amplitude is …………. carrier amplitude Q8. In an AM wave, the majority of the power is in ……………. Q9. At 100% modulation, the power in each sideband is ………………… of that of carrier Q10. Overmodulation results in ………….. Q11. If modulation is 100% then signal amplitude is ………….. carrier amplitude Q12.

Is there such a thing as amplitude modulation?

Yet in spite of this decrease, amplitude modulation is in such extensively used, particularly for broadcasting, and many amplitude modulation signals can be heard on the several long, medium and short wavebands where they will unquestionably be heard for many years to come.

About the Author

You may also like these