Why is my Maytag front load washer not draining?
A clogged pump filter could also be responsible for a Maytag washer not draining. As the wash water drains, the filter screens out debris to prevent it from clogging the drain pump. If the filter becomes clogged, water can’t flow to the drain pump and exit the washer.
What causes a front load washer not to drain?
A washing machine not draining is one of the most common problems we encounter. It can be caused by one of the following: – The drain hose or pump is clogged with a small item of clothing, residual gunk or other debris. – The washer is malfunctioning and not engaging the drain/spin cycle properly.
How do I reset my Maytag front load washer?
How to Reset a Maytag Washer
- Press the “Power/Cancel” button.
- Push the appropriate button to choose a new cycle.
- Press “Start/Pause.” You have now reset your Maytag washer.
How do you unclog a Maytag washing machine?
- Prepare the Machine. Pull Away from the Wall. With your supplies ready, it’s time to prep the washing machine.
- Clear the Water. Bail Out the Basket. If the washer is full of water that isn’t draining away, you’ll need to bail it out.
- Remove the Front Panel. Prop Up the Washer Front.
- Start the Clog Hunt. Check the Pump Housing.
How do you unclog a Maytag washer?
How do you fix a front loading washing machine that will not drain?
Check the Drain Hose or Pump for Clogs It’s common for a sock or other small piece of clothing to get into the drain system and clog the hose or pump. Remove the front panel of the washer and check for any obstructions in these areas. If you find anything, remove it to see if you can get the washing machine to drain.
Why is my Maytag washing machine not spinning?
One common cause why a Maytag top load washer won’t spin is due to an uneven load or jammed clothing . Larger items or loads tend to settle on one side of the washer drum during a cycle. Try to redistribute the load or remove a few articles of clothing and run the spin cycle on your washer again.
How do you drain a Maytag washer?
Unplug your Maytag Bravos washer from the electrical outlet. Slide the washer forward to access the drain and water supply hoses. Turn off the Bravos’ water supply at the wall. Use pliers to turn the water supply hose connections at the back of washer counterclockwise to remove them from the appliance.
How do you drain a Maytag Neptune washer?
Unscrew the clamp holding the hose that leads from the washer tub to the pump. Pull off the hose and direct it into a 2-gallon or larger bucket to catch water that hasn’t drained. Once all the water has drained out, remove the second hose in the same way.
Why is my washing machine not draining?
The most common cause of a washer not draining is a clogged water pump or drain hose. It is not unusual for small clothing items like socks or rags to get pulled into the machine’s drain system and block the hose going into the pump. They may even clog the water pump as well.
