How do you troubleshoot a Maytag refrigerator freezer?

How do you troubleshoot a Maytag refrigerator freezer?

1. The Refrigerator isn’t cooling or is too warm

  1. Adjust the temperature.
  2. Check the settings.
  3. Check if vents are obstructed.
  4. Make sure the icemaker is turned on.
  5. Check if the water line is kinked.
  6. Make sure water shut-off valves are fully open.
  7. Make sure the door is sealed properly.
  8. Wipe down the door seal gasket.

Why does my Maytag Bottom freezer built up ice on bottom?

Your Maytag fridge has an automatic defrost system that melts the ice from the freezer coils. Occasionally, the drain and drain line can freeze, causing water to begin to accumulate in the bottom of the freezer and begin to leak from the freezer onto the kitchen floor.

How do I reset my Maytag freezer?

Press and hold the buttons for 8 to 10 seconds to reset the display. The refrigerator display can be reset by pressing and holding the energy save and lighting button for 10 seconds.

Why is my Maytag fridge not cold?

Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.

How do you reset the compressor on a Maytag refrigerator?

4 steps to reset a refrigerator compressor

  1. Unplug your refrigerator.
  2. Turn off the refrigerator and freezer from the control panel.
  3. Reset your freezer and fridge temperature settings.
  4. Wait for the refrigerator temperature to stabilize.

Where is drain in Maytag freezer?

The drain is located at the bottom of the access panel on the back wall of freezer. You’ll notice vents at the bottom of the panel.

Is there a reset button on a Maytag refrigerator?

Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.

Where do I go to troubleshoot my Maytag refrigerator?

Another great way to do Maytag refrigerator troubleshooting is going online and typing in the company name along with the words troubleshooting, repair or parts to find a long list of companies that provide you with specific information related directly to your problem.

What should I do if my Refrigerator Door is not working?

Ensure door seals are making full contact with the refrigerator, so no humidity can sneak in. If they’re not, check that nothing is obstructing the door. Sometimes food pieces and soil can accumulate on the door seals, so wipe these down with a simple cloth, water and soap.

What to do if your refrigerator ice maker gets turned off?

Sometimes an icemaker can get accidentally turned off. Turn it back on by turning the dial to “Ice Maker On” or moving the lever over the ice bin down. Locate the water line behind the fridge. If it’s looped or kinked, straighten it to enhance water flow.

Why is my Refrigerator not cold when I turn it on?

There may be a simple reason why your fridge isn’t as cold as you expect. If it’s just been installed, you’ve recently loaded in a lot of food or the doors have been opened a lot that day, you may need to wait up to 24 hours for the temperature to drop back down. If not, run through these other steps to narrow down the cause.

About the Author

You may also like these