How do I connect to a Cisco console?

How do I connect to a Cisco console?

Step 1 Locate the console port on the back of the Router/Switch. Step 2 Connect the console (or rollover) cable to the console port on the Router/Switch. Step 3 Use the correct adapter to connect the other end of the cable to your terminal or PC.

How do I bring up a console switch?

Follow these steps to manage the switch via console port:

  1. Step 1 Connecting the PC to the Switch. Connect your PC to the console port of the switch with a console cable as the following figure shows.
  2. Step 2 Installing PuTTY on the PC.
  3. Step 3 Launching PuTTY and Configuring the PuTTY Session.
  4. Step 4 Launching the CLI.

How do I connect to a Cisco switch using PuTTY?

Configure putty to be able to communicate with the router over the USB port ( /dev/ttyUSB0 ).

  1. run sudo putty.
  2. Click on Serial for the Connection Type:
  3. Set the serial line to /dev/ttyUSB0.
  4. Click on Keyboard, then set backspace key to Control-H.
  5. Click on Session . Click on Default Settings. Click Save .
  6. Click Open .

How do I remotely connect to a Cisco switch?

Step 1 From the remote host, enter the telnet command and the name or IP address of the switch you want to access. Step 2 At the prompt, enter the password for the CLI. If no password has been configured, press Return. Step 3 Enter the necessary commands to complete your desired tasks.

How do I program a Cisco switch?

Steps to configure Cisco switch using CLI Initial command prompt “Switch>” appears on the screen. Type “enable” next to it and press “Enter”. This will take you into the “EXEC” mode, also known as the Global Configuration mode. Go into configure mode using configure terminal.

How do I remote control a switch?

To prepare a switch for remote management access, the switch must be configured with an IP address and a subnet mask. Keep in mind that to manage the switch from a remote network, the switch must be configured with a default gateway. This is very similar to configuring the IP address information on host devices.

What are the serial port settings for Cisco SF300?

The settings are applicable for the following models: SF302-08PP SG300-28 SF500-24 SG500X-24 SF302-08MPP SF300-48 SF500-24P SG500X-24P SG300-10PP SG300-20 SF500-24MP SG500X-24MPP SG300-10MPP SF302-08P SF500-48 SG500X-48 SF300-24PP SG300-52 SF500-48P SG500X-48P

Is there a problem with the Cisco sf300-24p?

Cisco is refreshing its SMB Switch portfolio. Click here to learn more. 01-11-2012 11:45 AM 01-11-2012 11:45 AM My company just bought a SF300-24P, got it configured without much issue. Today I try to get into it and I can’t. Tried via HTTP and console and nothing happens. Decided to try to reset it using the button on the front.

When did the Cisco SF300 PoE switch come out?

Cisco SF300-24P 24-Port 10/100 PoE Managed Switch with Gigabit Uplinks Series Cisco Small Business 300 Series Managed Overview Product Overview Status Orderable Buy Release Date 01-AUG-2010 Product ID View All PIDs

How to configure Cisco 300 series managed switches?

Refer to the Cisco 300 Series Managed Switch Administration Guide for further information. Use the console port To configure the switch by using the console port: STEP1Connect a computer to the switch console port using the provided serial cable. STEP2Start a terminal application such as HyperTerminal on the computer.

About the Author

You may also like these