Are Shimano front derailleurs interchangeable?
In addition, front derailleurs are made for either 7, 8, 9 or 10-speed chains, but they can often be used interchangeably. If you are using a different chain than your derailleur was made to work with, the degree of adjustment you can expect will be lower than with a matched set.
How do you adjust a Shimano STX front derailleur?
To adjust the height of the front derailleur, locate the positioning clamp that connects the derailleur to the frame of the bike. Turn the clamp bolt clockwise to loosen it and then adjust the height. Tighten the bolt once it’s adjusted.
Are there fake Shimano?
Fake ones are engraved with shimano and chain models for both sides of the chain and randomly sorted. If you find that it’s a big turn off. There is some expectation with some chains, you can check whether your original chain has a clean side or not.
Where does the derailleur fall on a Shimano bike?
The derailleur should fall around 1 to 3 millimetres (0.039 to 0.118 in) above the large chain ring. When the derailleur cage sits too far above the chainring, this can cause the bike to shift poorly.
What kind of derailleurs do you use for mountain biking?
Shimano derailleurs are ubiquitous in road and off-road cycling. They are known for their industry-leading dependability and toughness. For mountain and road biking, Shimano provides three levels of derailleurs, ranging from high end to midrange and budget derailleurs.
What should the height of the front derailleur be?
Adjusting the Height and Angle of the Front Derailleur. Make sure your derailleur sits at the correct height. The derailleur should fall around 1 to 3 millimetres (0.039 to 0.118 in) above the large chain ring. When the derailleur cage sits too far above the chainring, this can cause the bike to shift poorly.
Is the derailleur cage parallel to the chainrings?
The derailleur cage and the chainrings should be parallel. If they are not, you will have to make adjustments. It is easier to see what adjustments you have to make while you are looking down at the derailleur from above. Envision an alignment between the center of the cage and the centerline of the bike frame.
