What kind of bike is the Kawasaki ZX-6R?
The Ninja® ZX™-6R motorcycle features fresh aggressive styling inspired by the larger displacement Ninja® ZX-10R motorcycle with sharp and edgy lines that stay true to the iconic Ninja® image. Non U.S. model specs may be depicted. Equipment illustrated and specifications may vary to meet individual markets.
How much horsepower does a Ninja ZX 6R have?
We’ll get this over with early: Strapped to Motorcyclist’s SuperFlo dyno, the 2013 Kawasaki Ninja ZX-6R makes 112 horsepower at 13,300 rpm and 46.4 lb.-ft. of torque at 11,300 rpm. That’s up 3.3 bhp and 2.8 lb.-ft. compared to the 2012 bike in terms of peak power.
What’s the top speed of a 2013 ZX-6R?
The 2013 ZX-6R runs down the ¼-mile in 10.69 seconds at 129.24 mph, improbably close to the GSX-R750’s 10.44 sec. at 133.31 mph considering the Suzuki’s similar weight (it’s just 2 lbs. heavier) and superior power (a peak of 122 bhp).
Where is the oil filter on a Kawasaki ZX-6R?
The oil filter is located centrally on the left hand side of the bike, which means you can change it without removing the fairing…however, no matter how careful you are the oil will spill over the engine casing, hoses and cabling in that vacinity – I’d prefer a sump location to reduce the mess.
What kind of rotors does a ZX6R rear wheel need?
-03/04 ZX6R Rear Wheel is a direct bolt on, the front wheel needs the 05+ ZX6R rotors to be used. Always use the spacers for the generation wheel you are swapping for a direct swap.
What kind of pistons do Kawasaki Ninja ZX6R use?
-03-06 ZX6R Pistons fit, the “RR” Pistons are forged and 1MM smaller then the “636” Pistons. Use the 98/99 ZX6R “G” Cylinders, and bore them sense they are steel, and have a cheap Big Bore Kit, The 98/99 Head cant be used though, the engine needs a 00-02 Zx6R “J” Model head, or 05-08 ZZR600.
Is the ZX6R swingarm the same as the 98-02?
-03/04 ZX6R Swingarm is the same as the 98-02 in size, but it has an extra tab or two for more Hugger Choices. -05-08 ZX6R Swingarm bolts on, but the corresponding wheel needs to be used for it to be direct bolt on, also a longer chain and brake line is needed.