What is the password of ZyXEL?

What is the password of ZyXEL?

If you haven’t changed it before, please login with default username/password (admin/1234).

How do I reset my ZyXEL nsa320?

First RESET: Press the RESET button until you hear one beep (after about two seconds), then release it. You will hear one more beep after you release the button. This resets the NAS’s IP address and password to the default values.

How do I change my Zyxel password?

How to Change a Password on Zyxel

1. Open an Internet browser window and type “192.168. 10.1” in the URL text field.
2. Enter your username and password to log into the Web Configurator.
3. Click “Management” in the left navigation pane.
4. Enter your old password in the “Old Password” text field.
5. Tip.

How do I reset my Zyxel nas326 password?

You can press and hold the reset button till you hear one beep, then release the button. The admin’s password will be reset back to “1234”, and you can use admin/1234 to login web manage page.

How do I reset my Zyxel?

To factory reset the router, push a paper clip, knitting needle or pen into the Reset hole on the back of the router for 10 seconds (or until the lights flash). Please note, this will change the WiFi name and password back to the default.

How do I block a device from WiFi on Zyxel?

1. To set up parental control, please log on to your router (default IP: 192.168.1.1; admin/1234) Go to Security> Parental Control and choose “enable”.
2. Select the device(s) the rule has to work for (MAC address based).
3. Select when the rule has to work:
4. Now you can select what shall be blocked/allowed:

What’s the admin password for a Zyxel nsa325?

I’ve bought a ZyXEL NSA325 v2 NAS from Amazon and am in the process of setting it up. Using the NAS Starter Utility when I click “Run Initialization Wizard” it prompts for the username and password which according to the quick start guide and the user guide is admin / 1234.

Can you backup Linux laptop to Zyxel NSA 320?

In my case this is handy because I can now easily backup the home directory on my linux laptop directory to my home NAS over the wifi, using scp. In order to achieve this I obtained a copy of this archive: http://downloads.zyxel.nas-central.org/Users/Mijzelf/zypkg-repo/NSA320/4.70/zypkg/ (Since I have an NSA320, with firmware 4.70).

What’s the default username and password for nsa320?

The default administrator username is ‘admin’ and the default password is ‘1234’ and click Next. Figure 6 Initialization Wizard Welcome NSA320 User’s Guide… Page 33: Default Configuration

How to change the password on a Zyxel router?

Step 1-4 Change administration password Step 5-7 Change Wi-Fi SSID/password Step 1 Power on the device and connect it to your computer/laptop with a network cable. 3/10 www.zyxel.com Step 2 Open a browser and type in your router IP address on URL field.