How thick should a subfloor be for tile?

How thick should a subfloor be for tile?

1 1/8″
The subfloor under the tile should be at least 1 1/8″ thick, with a minimum of 5/8″ thick exterior grade plywood topped by 1/2″ cement backer board.

What is the minimum subfloor thickness?

about 5/8 inch
The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

Is 3/4 subfloor enough for tile?

Tile installed over wood floor systems MUST have a minimum of 1-1/4 inches of solid material beneath it. This means you can have a 3/4 inch wood subfloor covered by 1/2 inch plywood, cement board, or approved gypsum fiber underlayment.

How thick is natural stone tile?

Standard stone tile sizes include squares of 4”, 6”, 8”, 12”, 16”, 18”, and 24”. Standard thickness for 12” square tiles is 3/8”. Standard thickness for 16”-24” square tiles varies from 0.5” – 0.75”.

Is my subfloor strong enough for tile?

How Thick Does the Subfloor Need To Be for Tile? Tile is heavy, and the larger the floor you’re tiling and the thicker the tile, the heavier it’s going to be. That’s why, on average, your subfloor should be at least 1 ⅛” (2.86 cm) thick with a layer of concrete or ¾”-⅝” (1.91 to 1.59 cm) plywood or OSB underneath.

Do I need 2 layers of subfloor?

3 Answers. Fasten your first layer plywood subfloor as you normally should. The second (top) layer of plywood joints should not coincide with the joists and the second layer should not be fastened to the joists. Article quote from – Position of Underlayment to Prevent Cracked Tile and Grout By Frank Woeste and Peter A.

Can you tile directly to plywood?

Tile can be laid on plywood. But do not install tile directly on the plywood subfloor itself. Use an intervening layer of a sheet of thinner plywood.

How thick should sub floor be when installing ceramic tiles?

When installing a ceramic tile floor on a concrete subfloor, you don’t have to worry about flexing as long as the concrete slab is at least 1 1/8-inch thick, which most slabs are. However, you’re not out of the woods: Concrete expands and contracts, and that type of movement can also crack the tiles and the grout.

How much subfloor do you need under tile?

Tile installed over wood floor systems MUST have a minimum of 1-1/4 inches of solid material beneath it. This means you can have a 3/4 inch wood subfloor covered by 1/2 inch plywood, cement board, or approved gypsum fiber underlayment.

How thick subfloor needed Under tile?

The subfloor under the tile should be at least 1 1/8″ thick, with a minimum of 5/8 ″ thick exterior grade plywood topped by 1/2″ cement backer board.

What size plywood do I use for a subfloor?

The thickness of your plywood subfloor depends on the joist spans. The National Wood Flooring Association recommends a minimum plywood panel thickness of 7/8-inch for joist spans of 19.2 to 24 inches, and a minimum plywood panel thickness of 5/8-inch for joist spans of 16 inches or less.

About the Author

You may also like these