How do I fix my HP printhead alignment?

How do I fix my HP printhead alignment?

In HP Solution Center, click Settings, click Print Settings, and then click Printer Toolbox. The Printer Toolbox opens. Click Align the Print Cartridges. Click Align, and then follow the on-screen instructions.

How do I fix the alignment on my printer?

Windows

1. Click “Start,” then select “Devices and Printers.”
2. Right-click on the printer you need to align, then select “Printing Preferences” from the pop-up menu.
3. Click the “Services” tab, then click the “Align the Print Cartridges” icon.
4. Follow the instructions from the Alignment wizard to align the cartridges.

How do I bypass the alignment on my HP printer?

Follow these steps to open the printer toolbox and align the printer, if you found defects on the extended self-test report.

1. Press and hold the Cancel button ( ) and the On/Resume button ( ).
2. Release both buttons.
3. Press the Cancel button ( ) again.
4. Press the Copies button.
5. Press the Paper Type button.

How do you align ink cartridges on a HP printer?

Perform a cartridge alignment from the: Printer control panel (printers with control panel menus): Open the Tools or Printer Maintenance menu, and then select the option to Align cartridges, Align printhead, or Print an Alignment Page.

What to do when ink cartridge fails to align?

Press Enter on the front panel. You may discard the alignment page that prints. If the problem continues, check the cartridge ink levels. Both cartridges must have ink in them for successful alignment, so replace empty cartridges. When cartridges get low on ink, they begin to fail. This can cause lines or streaks in the printed output.

What should I do if my printer is not aligning?

Press the Options button. The printer should be ready to print. If the print quality is unacceptable after bypassing alignment, follow the steps below until the error is corrected. Make sure the printer is loaded with clean, unused, white paper. If the paper is not feeding properly, check the paper path.

What to do when ink level is low on HP printer?

In the HP Director software, click Settings, click Print Settings, and then click Printer Toolbox. In the Printer Toolbox, select the Estimate of Ink Level tab. If ink levels are low, replace the cartridge to get the best print quality. If one of the colors has been fully consumed, you must replace the cartridge.